LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2010 (Transfer Case) >> TX15B >> Shift Control >> Disassembly and Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install clevis pin and shift collar to L-H shift fork after assembling them.
    CAUTION: Use caution when installing L-H shift fork, clevis pin or shift collar.
  2. Install clevis pin and shift collar to 2-4 shift bracket after assembling them.
    CAUTION: Use caution when installing 2-4 shift bracket.
  3. Install guide fork collar and 2-4 shift fork spring to the 2-4 shift fork, and then secure it with the new retaining ring.
    CAUTION:
    • Do not reuse retaining ring.
    • Be careful with orientation.
    Fig 1: Identifying Fork Guide Collar And 2-4 Shift Fork Spring To 2-4 Shift Fork
    G04898612
  4. Install the 2-4shift bracket to the L-H shift rod.
  5. Install the new retaining pin evenly to the L-H shift rod.
    CAUTION: Do not reuse retaining pin.
    Fig 2: Identifying Retaining Pin Evenly To L-H Shift Rod
    G04898607
  6. Install the drum cam to the control shift rod, and then secure it with the new retaining pin.
    CAUTION: Do not reuse retaining pin.
  7. Install the new snap ring to the control shift rod.
    CAUTION: Do not reuse snap ring.
    Fig 3: Identifying Snap Ring And Retaining Pin
    G04898606
scientia non olet · About LEMON Manuals