LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2039 (Brake Control System) >> VDC/TCS/Abs >> G Sensor >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove center console lower cover. Refer to "INSTRUMENT PANEL ".
  2. Remove yaw rate/side/decel G sensor nuts.
    CAUTION:
    • Do not use power tools to remove or install yaw rate/side/decel G sensor.
    • Do not drop or strike the yaw rate/side/decel G sensor.
  3. Disconnect harness connector and remove the yaw rate/side/decel G sensor.
    Fig 1: Yaw Rate/Side/Decel G Sensor Nuts With Torque Specification
    G04906838Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals