LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2052 (Lighting System) >> Front Fog Lamp >> Front Fog Lamp Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Fog Lamp Assembly: Installation

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front fog lamp assembly.
    • Position the front fog lamp housing (4) and install the front fog lamp screws (3)
    • Press the bracket (2) onto the snap clip (1).
    • Install the screws (5).
  2. Connect the electrical connector.
  3. Verify fog lamp aiming. Refer to "AIMING ADJUSTMENT ".
  4. Install the fender protector. Refer to "FENDER PROTECTOR ".
    Fig 1: Identifying Bracket, Fog Lamp Screws And Front Fog Lamp Housing
    G04908581Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals