Disassembly And Assembly: Disassembly
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Remove rear center console. Refer to "REMOVAL AND INSTALLATION ".
- Remove cup holder assembly.
- Remove screws and rear console lid assembly.
- Disconnect harnesses and remove switch finisher and switch assembly.
- Remove screws to separate switch finisher and switch assembly.
- Remove screws and rear console tray.
- Disconnect harnesses.
- Remove power point assembly.
- Remove rear console lamp (if equipped).
- Remove screws and front lid assembly.
- Remove screws and striker from rear pass through assembly.
- Remove rear pass through lid assembly.
- Remove screws, lock assembly and key cylinder.