With NAVI: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

To avoid damage, eject map DVD-ROM disk before removing the NAVI control unit.
Cover NAVI control unit with a cloth and avoid contact of NAVI control unit with brackets that may cause scratches or damage to NAVI control unit.

Remove the front center console. Refer to "FRONT CENTER CONSOLE ".
Position driver side carpet flap aside.
Remove cluster lid D. Refer to "CLUSTER LID D ".
Remove cluster lid D bracket.

Fig 1: Identifying Cluster Lid Bracket
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove the bolts (1), disconnect the electrical connector and remove the NAVI control unit (2).
NOTE: NAVI control unit only on vehicles with navigation system.

Fig 2: Identifying Bolts And NAVI Control Unit
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove the screws (1), disconnect electrical connectors and remove the center stack (2).

Fig 3: Identifying Screws And Center Stack
Courtesy of NISSAN MOTOR CO., U.S.A.