CAN Communication Inspection Using CONSULT-III(Self-Diagnosis)

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

SELF-DIAGNOSTIC RESULT CHECK

CAUTION: If CONSULT-IIIis used with no connection of CONSULT-IIICONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.

Connect to CONSULT-III, and select "BCM""".
Check display content in self-diagnostic results.

DISPLAY ITEM LIST REFERENCE

CONSULT-IIIdisplay code	Diagnosis item
U1000	INITIAL DIAG
	TRANSMIT DIAG
	ECM
	IPDM E/R
	METER/M & A
	I-KEY

Contents displayed

No malfunction: Inspection End

Malfunction in CAN communication system: After printing the monitor items, go to "SYSTEM DESCRIPTION ".