Bulb Replacement: Removal
WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Turn fog lamp switch OFF before disconnecting and connecting the connector.
- Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
- Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance. Keep grease and other oily substances away from bulb.
- Do not leave bulb out of fog lamp reflector for a long time because dust, moisture, smoke, etc., may affect the performance of fog lamp. When replacing bulb, be sure to replace it with new one.
- Position the front fender protector aside. Refer to "FENDER PROTECTOR ".
- Disconnect electrical connector.
- Turn the bulb socket counterclockwise and remove bulb.