Switch Operation
WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
When front door switch LH is ON (door is opened), ground is supplied
- To ignition keyhole illumination terminal -
- Through BCM terminal 1.
And power is supplied
- Through BCM terminal 56
- To ignition keyhole illumination terminal +.
When any door switch is ON (door is opened), ground is supplied
- To front step lamp LH and RH terminal 1, and
- To foot lamp LH and RH terminal -
- Through BCM terminal 62.
And power is supplied
- Through BCM terminal 56
- To front step lamp LH and RH terminal 2
- To foot lamp LH and RH terminal +.
When room/map lamps switch is ON, ground is supplied
- To room/map lamps terminal 3
- Through grounds M57, M61 and M79.
And power is supplied
- Through BCM terminal 56
- To room/map lamps terminal 1.
When vanity lamp LH or RH is ON, ground is supplied
- To vanity lamp LH and RH terminal -
- Through grounds M57, M61 and M79.
And power is supplied
- Through BCM terminal 56
- To vanity lamp LH and RH terminal +.
When personal lamps 2nd row LH or RH is ON, ground is supplied
- To personal lamps 2nd row LH or RH terminal 3 (without rear roof console assembly) or personal lamps 2nd row terminal 2 (with rear roof console assembly)
- Through grounds M57, M61 and M79.
And power is supplied
- Through BCM terminal 56
- To personal lamps 2nd row LH or RH terminal 1 (without rear roof console assembly) or personal lamps 2nd row terminal 1 (with rear roof console assembly).
When personal lamps 3rd row LH or RH is ON, ground is supplied
- To personal lamps 3rd row LH or RH terminal 3 (without rear roof console assembly) or personal lamps 3rd row terminal 2 (with rear roof console assembly)
- Through grounds M57, M61 and M79.
And power is supplied
- Through BCM terminal 56
- To personal lamps 3rd row LH or RH terminal 1 (without rear roof console assembly) or personal lamps 3rd row terminal 1 (with rear roof console assembly).
When cargo lamp is ON, ground is supplied
- To cargo lamp terminal 1
- Through grounds M57, M61 and M79.
And power is supplied
- Through BCM terminal 56
- To cargo lamp terminal 2.