LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2153 (Security Control System) >> Removal And Installation >> Remote Keyless Entry Receiver >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front pillar upper finisher (RH). Refer to "COMPONENT ".
  2. Remove the side ventilator grille (RH). Refer to "EXPLODED VIEW ".
  3. Remove the instrument side finisher. Refer to "EXPLODED VIEW ".
  4. Remove the upper glove box. Refer to "EXPLODED VIEW ".
  5. Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).
    Fig 1: Identifying Harness Connector, Keyless Entry Receiver And Bolt
    G07152939
scientia non olet · About LEMON Manuals