Disassembly and Assembly: Disassembly
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Master cylinder sub-assembly cannot be disassembled.
- Remove reservoir tank only when absolutely necessary.
- While working, cover the primary piston rod with a cloth to prevent it from being damaged.
- Never use mineral oils such as kerosene, gasoline during the cleaning and assembly process.
- Do not drop parts. If a part is dropped, do not use it.
- Secure the flange of the master cylinder sub-assembly in a vise.CAUTION:
- Use copper plates or a cloth to cover the flange before securing it in the vise.
- When securing the master cylinder sub-assembly in a vise, be sure not to over-tighten the vise.
- Remove the pin and pull the reservoir tank off of the master cylinder sub-assembly.
- Remove the grommets from the master cylinder sub-assembly body.CAUTION: Do not reuse grommets.
- Remove the restriction washer from the master cylinder sub-assembly body.CAUTION: Do not reuse restriction washer.
- Remove the fluid level sensor.
- Remove the fluid pressure sensors (if equipped).CAUTION: Do not reuse fluid pressure sensors.