Removal And Installation: Installation

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.
Push mounting band pin to the vehicle side securely.
Referring to the mating marks marked during removal, install fuel tubes and EVAP tubes and fix to the clamps securely.
Before fixing fuel tank, temporarily install filler tube.
CAUTION: Use genuine filler tube mounting bolts or equivalent. Make sure to tighten them to the specified torque.
To connect quick connector, refer to Fuel Level Sensor Unit, Fuel Filter and Fuel Pump Assembly. See Removal and Installation .