4. Check APP Sensor Ground Circuit For Open And Short
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF.
- Disconnect ECM harness connector.
- Check harness continuity between ECM terminal 82 and APP sensor terminal 4, ECM terminal 83 and APP sensor terminal 5.
Refer to WIRING DIAGRAM.
- Continuity should exist.
- Also check harness for short to ground or short to power.
OK or NG
- OK : GO TO 6 .
- NG : GO TO 5.