LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (Engine Controls - System & Component Testing) >> Electronic Controlled Engine Mount >> Diagnostic Procedure >> 2. Check Overall Function >> Without CONSULT-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to normal operating temperature.
  2. Shift selector lever to D range while depressing the brake pedal and parking brake pedal.
  3. Disconnect front or rear electronic controlled engine mount harness connector when engine speed is more than 1,000 rpm.
  4. When returning engine speed to idle speed, check that body vibration increases compared with the condition of the above step 2 (with vehicle stopped).

OK or NG 

  1. OK : INSPECTION END  .
  2. NG : GO TO 4.
scientia non olet · About LEMON Manuals