LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (Engine Controls - System & Component Testing) >> Electronic Controlled Engine Mount >> Diagnostic Procedure >> 3. Check Overall Function >> Without CONSULT-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to normal operating temperature.
  2. Disconnect front electronic controlled engine mount harness connector when engine speed is more than 1,000 rpm.
  3. When returning engine speed to idle speed, check that body vibration increases compared with the condition of the above step 1 (with vehicle stopped).

    If the vibration is not changed, go to next step.

  4. Check that the motor operating sound is heard from front electronic controlled engine mount for about 0.5 seconds when changing engine speed from idle to more than 1,000 rpm (with vehicle stopped).

OK or NG 

  1. OK : INSPECTION END  .
  2. NG : GO TO 4.
scientia non olet · About LEMON Manuals