LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 533 (Engine Control System - Sedan) >> DTC P1572: ASCD Brake Switch >> DTC Confirmation Procedure >> With Consult-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Consult-II

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine (VDC switch OFF).
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Press MAIN switch and make sure that CRUISE indicator lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    TESTING CONDITION

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Shift lever Suitable position

    If 1st trip DTC is detected, go to "Diagnostic Procedure "

    If 1st trip DTC is not detected, go to the following step.

    Fig 1: Data Monitor Display
    G02349008Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    DATA MONITOR DISPLAY

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Shift lever Suitable position
    Driving location Depress the brake pedal for more than five seconds so as not to come off from the above-mentioned vehicle speed.
  6. If 1st trip DTC is detected, go to "Diagnostic Procedure ".
scientia non olet · About LEMON Manuals