April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM Inspection Table

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: ECM Inspection Table - (1 Of 9)

G02348254

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ECM Inspection Table - (2 Of 9)

G02348255

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ECM Inspection Table - (3 Of 9)

G02348256

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: ECM Inspection Table - (4 Of 9)

G02348257

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: ECM Inspection Table - (5 Of 9)

G02348258

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: ECM Inspection Table - (6 Of 9)

G02348259

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: ECM Inspection Table - (7 Of 9)

G02348260

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: ECM Inspection Table - (8 Of 9)

G02348261

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 9: ECM Inspection Table - (9 Of 9)

G02348262

Courtesy of NISSAN MOTOR CO., U.S.A.