Synchronization Of Sliding/Tilt-Up Roof
WARNING: This page does not describe the selected car, but rather 164 other vehicles, including the 2002 Volvo V70, 2002 Volvo V40, 2002 Volvo S80, 2002 Volvo S60, and 2002 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Synchronization must be performed whenever desynchronization occurs (battery disconnected or control module replaced). Synchronization is necessary for convenience opening and closing of sliding/tilt-up roof.
To synchronize sliding/tilt-up roof, press sliding roof switch forward opening sliding/tilt-up roof to full tilt up position. After roof reaches full tilt-up position, maintain pressure on switch for 5 seconds. When DCM detects motor lock-up for specified period, position counter is reset to zero. Sliding/tilt-up roof is now synchronized, allowing sliding roof panel to stop before mechanical limit stop is reached.