Front Passenger Side Door
WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
Front power window sub-switch operation
Ground is supplied:
- to passenger door control unit terminal 11
- through body grounds M24 and M114.
Window up
When the front power window sub-switch is pressed in the up position
Power is supplied:
- to front power window regulator terminal 1
- through passenger door control unit terminal 14.
Ground is supplied:
- to front power window regulator terminal 2
- through passenger door control unit terminal 3.
Then, the motor raises the window until the switch is released.
Window down
When the front power window sub-switch is pressed in the down position
Power is supplied:
- to front power window regulator terminal 2
- through passenger door control unit terminal 3.
Ground is supplied:
- to front power window regulator terminal 1
- through passenger door control unit terminal 14.
Then, the motor lowers the window until the switch is released.
Front power window main switch operation Signal is sent
- to passenger door control unit terminal 15
- through driver door control unit (LCU01) terminal 5.
The operation of power window after receive the signal is as same as operate the front power window sub-switch.