Rear Door RH
WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
Rear power window sub-switch RH operation
Ground is supplied:
- to rear RH door control unit terminal 11
- through body grounds B217 and B256.
Window up
When the rear power window sub-switch RH is pressed in the up position
Power is supplied:
- to rear power window regulator RH terminal 1
- through rear RH door control unit terminal 14.
Ground is supplied:
- to rear power window regulator RH terminal 2
- through rear RH door control unit terminal 3.
Then, the motor raises the window until the switch is released.
Window down
When the rear power window sub-switch RH is pressed in the down position
Power is supplied:
- to rear power window regulator RH terminal 2
- through rear RH door control unit terminal 3.
Ground is supplied:
- to rear power window regulator RH terminal 1
- through rear RH door control unit terminal 14.
Then, the motor lowers the window until the switch is released.
Power window main switch operation
Signal is sent
- to rear RH door control unit terminal 15
- through driver door control unit (LCU01) terminal 5.
The operation of power window after receive the signal is as same as operate the rear power window sub-switch RH.