Work Flow
WARNING: This page is about a different car, the 2003 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
- Check the symptom and customer's requests.
- Understand the outline of system. Refer to "SYSTEM DESCRIPTION ".
- Perform the preliminary check. Refer to "PRELIMINARY CHECK ".
- Perform the communication inspection. If CONSULT-II is used, refer to
"IVMS COMMUNICATION INSPECTION
" section. If CONSULT-II is not used, refer to
"COMMUNICATION DIAGNOSIS
". Is communication diagnosis result OK?
OK: GO TO step 7
NG: GO TO step 5
- Repair or replace depending on the diagnosis result.
- Perform the communication diagnosis again. If CONSULT-II is used, refer to
"IVMS COMMUNICATION INSPECTION
". If CONSULT-II is not used, refer to
"COMMUNICATION DIAGNOSIS
". Is communication diagnosis result OK?
OK: GO TO step 7
NG: GO TO step 5
- Perform the self-diagnosis. If CONSULT-II is used, refer to
"SELF-DIAGNOSIS RESULTS
". If CONSULT-II is not used, refer to
"POWER DOOR LOCK SYSTEM SELF-DIAGNOSIS
". Is self-diagnosis result OK?
OK: GO TO step 11
NG: GO TO step 8
- Repair or replace depending on the diagnosis result.
- Perform the self-diagnosis again. If CONSULT-II is used, refer to
"SELF-DIAGNOSIS RESULTS
", If CONSULT-II is not used, refer to
"POWER DOOR LOCK SYSTEM SELF-DIAGNOSIS
". Is self-diagnosis result OK?
OK: GO TO step 11
NG: GO TO step 8
- Referring to trouble diagnosis chart, repair or replace the cause of the incident. Refer to "SYMPTOM CHART "
- Does power door lock system operate normally? If it operates normally, GO TO step 12. If NG, GO TO step 10
.
YES: GO TO step 12
NO: GO TO step 10
- Inspection END.