LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 814 (Can System) >> Can System (For TCS Models) >> Work Flow >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Flow: Notes

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Print all the data of "SELF-DIAG RESULTS" and "DATA MONITOR" for "ENGINE""A/T""BCM", and "ABS" displayed on CONSULT-II. Refer to CONSULT-II for "ENGINE" and CONSULT-II for "A/T". Refer to CONSULT-II for "BCM". Refer to CONSULT-II FUNCTION for "ABS".
  2. Attach the printed sheet of "SELF-DIAG RESULTS" and "DATA MONITOR" onto the check sheet. Refer to "CHECK SHEET ".
  3. Based on the data monitor results, put check marks onto the items with "UNKWN" or "NG" in the check sheet table. Refer to "CHECK SHEET ".
    NOTE: If "NG" is displayed on "CAN COMM" for the diagnosed control unit, replace the control unit.
  4. According to the check sheet results (example), start inspection. Refer to CHECK SHEET RESULTS (EXAMPLE) ".
scientia non olet · About LEMON Manuals