LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 856 (Brake Control System) >> Abs >> Trouble Diagnosis >> CONSULT- II Functions >> Data Monitor >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch ABS, DATA MONITOR in order on CONSULT-II screen.

    If ABS is not indicated, go to CONSULT-II Data Link Connector (DLC) Circuit.

    CAUTION: When START (NISSAN BASED VHCL) is touched immediately after starting engine or turning on ignition switch, ABS might not be displayed in system selection screen. In this case, repeat the operation from step 2.
  2. Return to Monitor Item Selection screen, and touch ECU INPUT SIGNALS, MAIN SIGNALS or SELECTION FROM MENU. Refer to following information.
  3. When START is touched, data monitor screen is displayed.
scientia non olet · About LEMON Manuals