April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Clutch Switch (For M/T Models)

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF.
Disconnect ASCD clutch switch harness connector.
Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.

Fig 1: Checking Continuity Between ASCD Clutch Switch Terminals 1 And 2
Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD clutch switch installation, refer to CLUTCH SYSTEM and perform step 3 again.

Fig 2: Stop Lamp Switch Terminals 1 And 2 Continuity Conditions Chart
Courtesy of NISSAN MOTOR CO., U.S.A.