Saved Data List Reprogramming With Consult III Plus (NTB12-074)

WARNING: This page is about the Sentra Base, Automatic, which is a different variant/trim than selected.

Publication date: 2012-09-12
Reference number: NTB12-074

SAVED DATA LIST REPROGRAMMING WITH CONSULT III PLUS

TECHNICAL SERVICE BULLETIN

Reference Number(s): NTB12-074, Date of Issue: September 12, 2012

CLASSIFICATION:	EC12-021
APPLIED VEHICLES:	All

SERVICE INFORMATION

When performing a "Reprogramming" operation with C-III plus, the screen in Figure 1 may display.
This screen displays "Saved Data" from previous C-III plus operations.
During the initial "Reprogramming Confirmation" set-up, if you get this screen:
1. Select Delete , then
2. Select Other Operation , then
3. Continue with the reprogramming procedure.

NOTE: If reprogramming does not complete, this screen can display for reprogramming recovery. Do not select Delete if this screen displays during reprogram recovery.