Diagnostic Procedure
- CHECK DTC WITH TCM
Check DTC with TCM. Refer to TROUBLE DIAGNOSIS .
OK or NG
- OK: GO TO 2.
- NG: Perform trouble shooting relevant to DTC indicated.
- CHECK DTC WITH "ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)"
Refer to TROUBLE DIAGNOSIS (models without TCS) or " TROUBLE DIAGNOSIS " (models with TCS).
OK or NG
- OK: GO TO 3.
- NG: Repair or replace.
- CHECK COMBINATION METER FUNCTION
Refer to " COMBINATION METER ".
- : INSPECTION END