DIAGNOSTIC TROUBLE CODES Confirmation Procedure: Notes

CAUTION: Always drive at a safe speed.

NOTE:

If DTC P0011 or P0021 is displayed with DTC P1111 or P1136, first perform trouble diagnosis for DTC P1111 or P1136. Refer to DTC P1111, P1136 IVT CONTROL SOLENOID VALVE .
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION:

Before performing the following procedure, confirm that battery voltage is between 10 V and 16 V at idle.