LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Maxima SL >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System >> ASCD Brake Switch >> Component Inspection >> Stop Lamp Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stop Lamp Switch

  1. Turn ignition switch OFF.
  2. Disconnect stop lamp switch harness connector.
  3. Check harness continuity between stop lamp switch terminals 1 and 2 under the following conditions.
    STOP LAMP SWITCH CONTINUITY

    Condition Continuity
    When brake pedal: Fully released. Should not exist.
    When brake pedal: Depressed. Should exist.

    If NG, adjust stop lamp switch installation, refer to BRAKE PEDAL and perform step  3 again.

    Fig 1: Checking Continuity Between Stop Lamp Switch Terminals
    G02410808Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals