LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P1402: EGR Function >> Diagnostic Trouble Codes Confirmation Procedure >> With GST
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With GST

  1. Turn ignition switch ON and select "Service $01" with GST.
  2. Check that engine coolant temperature is within the range of -10 to 50°C (14 to 122°F).
  3. Check that voltage between ECM terminal 54 (EGR temperature sensor signal) and ground is less than 4.8V.
    Fig 1: Checking Voltage Between ECM Terminal 54 & Ground
    G02474495Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Start engine and let it idle for at least 80 seconds.
  5. Stop engine.
  6. Turn ignition switch OFF, wait at least 10 seconds and then turn ON.
  7. Select "Service $07" with GST.
  8. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".