April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM Inspection Table

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.

Fig 1: Identifying ECM Inspection Table (1 Of 10)

G02446788

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ECM Inspection Table (2 Of 10)

G02446789

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ECM Inspection Table (3 Of 10)

G02446790

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Identifying ECM Inspection Table (4 Of 10)

G02446791

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: ECM Inspection Table (5 Of 10)

G02446792

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: ECM Inspection Table (6 Of 10)

G02446793

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 7: ECM Inspection Table (7 Of 10)

G02446794

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 8: ECM Inspection Table (8 Of 10)

G02446795

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 9: ECM Inspection Table (9 Of 10)

G02446796

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 10: ECM Inspection Table (10 Of 10)

G02446797

Courtesy of NISSAN MOTOR CO., U.S.A.