Without Power Door Locks: Notes

The warning chime is controlled by the time control unit.

The warning chime is located in the time control unit.

Power is supplied at all times:

• Through 10A fuse [No. 13, located in fuse block (J/B)]
• To time control unit terminal 7
• Through 10A fuse [No. 12, located in the fuse block (J/B)]
• To key switch terminal 2, and
• Through 10A fuse (No. 38, located in the fuse and fusible link box)
• To combination switch (lighting switch) terminal 11.

With the ignition switch in the ON or START position, power is supplied:

• Through 10A fuse [No. 10, located in the fuse block (J/B)]
• To time control unit terminal 9.

Ground is supplied to time control unit terminal 8 through body grounds M28 and M54.

When a signal, or combination of signals, is received by the time control unit, the warning chime will sound.