With Abs
WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK COMBINATION METER INPUT SIGNAL
- Start engine and select "METER/M&A" on CONSULT-III.
- Using "SPEED METER" on "DATA MONITOR", compare the value of "DATA MONITOR" with speedometer pointer of combination meter.
OK or NG
OK: Perform ABS actuator and electric unit (control unit) self-diagnosis. Refer to "CONSULT-III FUNCTION (ABS) ".
NG: Replace combination meter. Refer to "COMBINATION METER ".