Removal and Installation of BCM: Installation
WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
CAUTION:
- When replacing BCM, perform "WRITE CONFIGURATION". Refer to "CONFIGURATION ".
- When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to "KEY SWITCH (INTELLIGENT KEY UNIT INPUT) CHECK ".
- When replacing BCM, if new BCM does not come with keyfobs attached, all existing keyfobs must be re-registered. Refer to CONSULT-III operation manual for the initialization procedure.