LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Altima SE-R, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Abs >> Trouble Diagnosis >> CONSULT-II Function (ABS) >> Active Test Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Active Test Procedure

  1. Turn ignition switch OFF.
  2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
    Fig 1: Locating Data Link Connector
    G04160173Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Start engine.
  4. Touch "START (NISSAN BASED VHCL)" on CONSULT-II screen.
    Fig 2: Consult-II Display Screen
    G04151184Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS" in the "SELECT SYSTEM" screen.

    If "ABS" is not indicated, go to , "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

    Fig 3: Consult-II SELECT SYSTEM Display Screen
    G04083859Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "ACTIVE TEST".
    Fig 4: Consult-II SELECT DIAG MODE Display Screen
    G04083861Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Select active test item by touching screen.
    Fig 5: CONSULT-II Screen Display - Select Test Item
    G04169783Courtesy of NISSAN MOTOR CO., U.S.A.
  8. Touch "START".
  9. Carry out the active test by touching screen key.
scientia non olet · About LEMON Manuals