Data Monitor Mode
DATA MONITOR MODE SPECIFICATION
| MONITOR ITEM | CONDITION | SPECIFICATION |
|---|---|---|
| FR RH SENSOR FR LH SENSOR RR RH SENSOR RR LH SENSOR |
Drive vehicle. (Each wheel is rotating.) |
Displays computed vehicle speed from wheel sensor signal. Almost the same speed as speedometer. |
| STOP LAMP SW | Turn ignition switch ON and depress brake pedal. | Depress the pedal: ON Release the pedal: OFF |
| ENGINE SPEED | Engine is running. (rpm) | Engine speed: 0 - 8,000 (rpm) |
| FR RH IN SOL FR RH OUT SOL FR LH IN SOL FR LH OUT SOL RR RH IN SOL RR RH OUT SOL RR LH IN SOL RR LH OUT SOL |
Ignition switch is turned ON or engine is running. | Operating conditions for each solenoid valve are indicated. ABS is not operating: OFF |
| ACTUATOR RLY | Ignition switch is turned ON or engine is running. | Displays ON/OFF condition of ABS actuator relay. When turning ignition switch ON, ABS actuator relay is operated. |
| MOTOR RELAY | ABS is not operating: OFF ABS is operating: ON |
|
| ABS WARN LAMP | Warning lamp is turned on: ON Warning lamp is turned off: OFF |
|
| BATTERY VOLT | Power supply voltage for control unit | |
| GEAR (With A/T) | A/T gear position signal detected by TCM via ECM is displayed. | Gear position: P, N: N.P 1st: 1 2nd: 2 3rd: 3 4th: 4 |
| OFF SW | ON/OFF condition of signal from TCS switch is displayed. |
TCS OFF S/W (all the time switch is pressed): ON TCS OFF S/W (released): OFF |
| OFF LAMP |
|
TCS OFF indicator "OFF": OFF TCS OFF indicator "ON": ON |
| SLIP LAMP | The TCS functioning state is displayed by detecting rear wheel slip. | SLIP indicator "ON": ON SLIP indicator "OFF": OFF |
| SLCT LVR POSI (With A/T) | A/T selector lever position is displayed. | Park: P Reverse: R Neutral: N 4th: 4 3rd: 3 2nd: 2 1st: 1 |