LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Altima SE-R, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Abs >> Trouble Diagnosis >> CONSULT-II Function (ABS) >> Data Monitor Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor Mode

DATA MONITOR MODE SPECIFICATION

MONITOR ITEM CONDITION SPECIFICATION
FR RH SENSOR
FR LH SENSOR
RR RH SENSOR
RR LH SENSOR
Drive vehicle.
(Each wheel is rotating.)
Displays computed vehicle speed from wheel sensor signal.
Almost the same speed as speedometer.
STOP LAMP SW Turn ignition switch ON and
depress brake pedal.
Depress the pedal: ON
Release the pedal: OFF
FR RH IN SOL
FR RH OUT SOL
FR LH IN SOL
FR LH OUT SOL
RR RH IN SOL
RR RH OUT SOL
RR LH IN SOL
RR LH OUT SOL
Ignition switch is turned ON or engine is running. Operating conditions for each solenoid valve are indicated.
ABS is not operating: OFF
ACTUATOR RLY Ignition switch is turned ON or engine is running. Displays ON/OFF condition of ABS actuator relay.
When turning ignition switch ON, ABS actuator relay is operated.
MOTOR RELAY ABS is not operating: OFF
ABS is operating: ON
ABS WARN LAMP Warning lamp is turned on: ON
Warning lamp is turned off: OFF
BATTERY VOLT Power supply voltage for control unit