Diagnostic Procedure

1. Start engine and let it idle.
2. Listen for an intake air leak after the mass air flow sensor.

OK or NG 

OK: GO TO 2.

NG: Discover air leak location and repair.

1. Stop engine.
2. Replace ECM.
3. Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs. Refer to "NVIS(NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS) ".
4. Perform "VIN REGISTRATION ".
5. Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".
6. Perform "THROTTLE VALVE CLOSED POSITION LEARNING ".
7. Perform "IDLE AIR VOLUME LEARNING ".

: INSPECTION END