LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Quest SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing >> ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    CONNECTOR TERMINAL CONTINUITY SPECIFICATION

    Condition Continuity
    Brake pedal: Fully released Should exist
    Brake pedal: Slightly depressed Should not exist

    If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL ", and perform step  3 again.

    Fig 1: Checking Continuity Between ASCD Brake Switch Terminals 1 And 2
    G04895072Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals