With Power Door Locks: Notes
WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
The warning chime is controlled by the smart entrance control unit.
The warning chime is located in the smart entrance control unit.
Power is supplied at all times:
- through 10A fuse (No. 37, located in fuse and fusible link box)
- to smart entrance control unit terminal 10,
- through 10A fuse [No. 12, located in the fuse block (J/B)]
- to key switch terminal 2, and
- through 10A fuse (No. 38, located in the fuse and fusible link box)
- to combination switch (lighting switch) terminal 11.
With the ignition switch in the ON or START position, power is supplied:
- through 10A fuse [No. 10, located in the fuse block (J/B)]
- to smart entrance control unit terminal 33.
Ground is supplied to smart entrance control unit terminal 16 through body grounds M28 and M54.
When a signal, or combination of signals, is received by the smart entrance control unit, the warning chime will sound.