Brake Hydraulic Line: Installation

WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Tighten all flare nuts and connecting bolts.
Specification

Flare nut: 15 -18 N.m (1.5 - 1.8 kg-m, 11 - 13 ft-lb)

Connecting bolt: 17 - 20 N.m (1.7 - 2.0 kg-m, 12 - 14 ft-lb)

Fig 1: View OF Flare Nut Tubing Wrench

Courtesy of NISSAN MOTOR CO., U.S.A.

Refill until new brake fluid comes out of each air bleeder valve.
CAUTION:
- Refill with new brake fluid "DOT 3".
- Never reuse drained brake fluid.
Bleed air from brake system. Refer to "BLEEDING BRAKE SYSTEM ".