CONSULT-II Function (SMART ENTRANCE): Notes
WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
SMART ENTRANCE DIAGNOSTIC TEST ITEM
| SMART ENTRANCE diagnostic test item | Diagnostic mode | Description |
|---|---|---|
| Inspection by part | DATA MONITOR | Displays BCM input/output data in real time. |
| ACTIVE TEST | Operation of electrical loads can be checked by sending drive signal to them. |
CAUTION:
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.