CAN Communication Inspection Using CONSULT-III (Self-Diagnosis)

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

SELF-DIAGNOSTIC RESULT CHECK

Connect CONSULT-III and select "BCM" on "SELECT SYSTEM" screen.
Select "BCM" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".
Check display content in self-diagnostic results.

DIAGNOSIS ITEM CHART

CONSULT-III display code	Diagnosis item
U1000	INITIAL DIAG
	TRANSMIT DIAG
	ECM
	IPDM E/R
	METER/M&A
	I-KEY

Contents displayed

No malfunction:Inspection End.

Malfunction in CAN communication system: After printing the monitor items. Refer to "CONDITION OF ERROR DETECTION ".