LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Body Control System) >> Service Information >> BCM (Body Control Module) >> Removal and Installation of BCM >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation of BCM: Installation

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:
  • When replacing BCM, perform "WRITE CONFIGURATION". Refer to "CONFIGURATION ".
  • When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to "KEY SWITCH (INTELLIGENT KEY UNIT INPUT) CHECK ".
  • When replacing BCM, if new BCM does not come with keyfobs attached, all existing keyfobs must be re-registered. Refer to CONSULT-III operation manual for the initialization procedure.
scientia non olet · About LEMON Manuals