Removal and Installation: Removal
- Remove cowl top panel. Refer to "REMOVAL AND INSTALLATION ".
- Remove front tires using power tool.
- Remove harness of wheel sensor from strut assembly. Refer to
"REMOVAL AND INSTALLATION
".CAUTION: Do not pull on wheel sensor harness.
- Remove brake hose lock plate. Refer to "BRAKE TUBE AND HOSE ".
- Remove the nut on the upper side of stabilizer connecting rod using power tool, and then remove stabilizer connecting rod from strut assembly.
- Remove nuts and bolts, and then remove steering knuckle from strut assembly. Refer to "COMPONENT ".
- Remove the strut mounting insulator bolts, then remove strut assembly.