Diagnostic Procedure
- CHECK STEP MOTOR
With CONSULT-III
It is monitoring whether "GEAR RATIO: 2.34 - 0.39" changes similarly to "STM STEP: 0 - 177" by DATA MONITOR mode. Refer to "DATA MONITOR MODE ".
Without CONSULT-III
Inspect the engine speed (rise and descend), vehicle speed, throttle position, and check shift change. Refer to "VEHICLE SPEED WHEN SHIFTING GEARS ".
OK or NG
OK: INSPECTION END
NG: Replace the transaxle assembly. Refer to "REMOVAL AND INSTALLATION (MR20DE) ".