LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (CVT) >> Precautions >> Service After Replacing TCM and Transaxle Assembly >> Pattern A
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pattern A

  1. Shift the selector lever to "P" position after replacing TCM. Turn the ignition switch ON.
  2. Check that the shift position indicator in the combination meter turns ON (It indicates approximately 1 or 2 seconds after turning the ignition switch ON.)
    • Check the following items if the shift position indicator does not turn ON. Repair or replace the shift position indicator if necessary.
      • The harness between TCM and ROM ASSY in the transaxle assembly is open or short.
      • Cable disconnected, loosen, or bent from the connector housing.
scientia non olet · About LEMON Manuals