LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (CVT) >> Precautions >> Service After Replacing TCM and Transaxle Assembly >> Service After Replacing TCM And Transaxle Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service After Replacing TCM And Transaxle Assembly

Perform the applicable service in the following sheet when replacing TCM or transaxle assembly

CAUTION:
  • Do not start the engine until the service is completed.
  • "TCM - POWER SUPPLY [P1701]" may be indicated soon after replacing TCM or transaxle assembly (after erasing the memory at the pattern B). Restart the self-diagnosis after erasing the self-diagnosis result. Check that no error is detected.
    TCM SERVICE PATTERN

    TCM CVT assembly Service pattern
    Replace the new unit. Do not replace the unit. "PATTERN A "
    Do not replace the unit. Replace the new or old unit. "PATTERN B "
    Replace the old unit. Do not replace the unit.
    Replace the new or old unit.
    Replace the new unit. Replace the new or old unit. "PATTERN C "
NOTE: Old unit means that the unit has been already used for another vehicle.
scientia non olet · About LEMON Manuals