LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P0444 Through P1168 >> DTC P0550 PSP Sensor >> Component Inspection >> Power Steering Pressure Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Steering Pressure Sensor

  1. Reconnect all harness connectors disconnected.
  2. Start engine and let it idle.
  3. Check voltage between ECM terminal 12 and ground under the following conditions.
    CONNECTOR TERMINAL VOLTAGE SPECIFICATION

    Condition Voltage
    Steering wheel: Being turned 0.5 - 4.5V
    Steering wheel: Not being turned 0.4 - 0.8V
    Fig 1: Checking Voltage Between ECM Terminal 12 And Ground
    G04900567Courtesy of NISSAN MOTOR CO., U.S.A.