LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P1211 Through P2A03 >> DTC P1402 EGR Function >> DTC Confirmation Procedure >> With GST
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With GST

  1. Turn ignition switch ON and select Service $01 with GST.
  2. Check that engine coolant temperature is within the range of -10 to 50°C (14 to 122°F).
  3. Check that voltage between ECM terminal 54 (EGR temperature sensor signal) and ground is less than 4.8V.
  4. Start engine and let it idle for at least 80 seconds.
  5. Stop engine.
  6. Turn ignition switch OFF, wait at least 10 seconds and then turn ON.
  7. Select Service $07 with GST.
  8. Check 1st trip DTC.
  9. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Checking Voltage Between ECM Terminal 54 (EGR Temperature Sensor Signal) And Ground
    G04905711Courtesy of NISSAN MOTOR CO., U.S.A.