LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P1211 Through P2A03 >> DTC P1421 Cold Start Control >> DTC Confirmation Procedure >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure: Notes

NOTE:
  • If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
  • If DTC P1421 is displayed with other DTC, first perform the trouble diagnosis for other DTC.
    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 11V at idle.