LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2008 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - DTCS P1211 Through P2A03 >> DTC P1564 ASCD Steering Switch >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

  1. If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Wait at least 10 seconds.
  4. Press MAIN switch for at least 10 seconds, then release it and wait at least 10 seconds.
  5. Press CANCEL switch for at least 10 seconds, then release it and wait at least 10 seconds.
  6. Press RESUME/ACCELERATE switch for at least 10 seconds, then release it and wait at least 10 seconds.
  7. Press SET/COAST switch for at least 10 seconds, then release it and wait at least 10 seconds.
  8. Check DTC.
  9. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals